HPM 200
Mounted on CAT 330F base
The HPM200 are available in the following configuration:
HPM200 11 feet - HPM200 Short Mast - HPM200 Standard Mast
Each rig can be easily converted from standard to short-mast version and vice versa in a very short time for a true multipurpose rig.
Base
HPM200 uses a Caterpillar Cat 330F, this base has a C7.1 ACERT Tier 4 diesel engine with a power of 180 kW (175 kW fly wheel).
Rotary
The Rotary of HPM200 is composed of two pinions and a ring gear of supported by high speed rotation bearings.
The pinions are moved by two bent-axis, variable displacement motors (Parker) and two gearboxes fitted with power shift transmission (Zollern).
The rotary is able to provide a maximum and effective torque of 185000 lbf-ft (251 kNm) to 6rpm, the working speed can be set by the operator in the cab to values between 9 and 27 rpm.
Patented Rotary Gear System
During the working phase, the operator can choose the right rotary rotation speed, having 10 speed level choices.
HPM has a gear control system that allows the operator to reach quickly the optimal spin-off speed, with just one click.
Patented Counterweight Removal System
HPM200 is equipped with a patented counterweight removal system.
By using two levers, the operator can safely lower and lift the 17.000 lb (7.7ton) counterweight without the need of a crane.
This feature also gives contractors the ability to quickly and easily reduce the overall weight of the rig during the transport phase, making possible to utilize a standard-sized trailer and reduce then hauling costs and avoids oversize/overweight permits.
HPM200 11"
The HPM200 comes with three major pluses:
- An effective torque of 185,000 lbf (251kN)
- An economical transportation weight of 74900 lbf (33.3 ton)
- A tool diameter in front of the mast of 11 ft (3350m)
Torque: 251 kNm, 185000 lf-ft
Max depth: 20 m, 65 ft
Weight: 50200 Kg, 110700 lb
Fly wheel Power: 175 kW, 239 hp
HPM200 Short Mast
The HPM200 Short Mast piling rig is a perfect match for many job sites including those with low-headroom conditions and large diameter requirements.
It can be converted from Short to Standard Mast version in very short time by adding the mast extension and replacing kelly bar, wire rope and pull down cylinder.
Torque: 251 kNm, 185000 lf-ft
Max depth: 15 m, 50 ft
Weight: 48200 Kg, 106200 lb
Fly wheel Power: 175 kW, 239 hp
HPM200 Full Mast
The HPM200, mounted on CAT 330F base has been designed to perform foundation piles with diameters of 8ft (2400mm) and a depth up to 60 meters using the 5/195 kelly bar.
It can be converted in Short Mast version in very short time by simply removing the mast extension and replacing kelly bar, wire rope and pull down cylinder.
Torque: 251 kNm, 185000 lf-ft
Max depth: 40 m, 130 ft
Weight: 54300 Kg, 119700 lb
Fly wheel Power: 175 kW, 239 hp