HPM 125
Mounted on a CAT 323FN base
HPM125 is available in the following configuration: HPM125 and HPM125 Short Mast.
As all the HPM machines, also the HPM125 is convertible from standard to short-mast configuration, and vice versa, easily by replacing mast, pull down cylinder, kelly bar and wire rope.
Base
HPM125 is mounted on a CAT 323FN Tier IV base, equipped with a CAT C4.4 ACERT engine meets Tier 4 Final emission standards.
Rotary
The rotary of the HPM125 is designed using a large pinion and ring gear supported by high-speed rotation bearing.
The pinion is moved by one bent-axle, variable displacements motor (PARKER), and a gearbox fitted with a power shift transmission (ZOLLERN).
The rotary provides a maximum effective torque of 94000 lbf-ft (130 kNm).
Patented Rotary Gear System
During the working phase, the operator can choose the right rotary rotation speed, having 10 speed level choices.
HPM has a gear control system that allows the operator to reach quickly the optimal spin-off speed, with just one click.
HPM125 Full Mast
HPM125 is the ideal machine for foundation, rathole and landfill drilling.
It's designed for the oil and gas job in the USA, its weight of 80000lb (36.3 Ton) and its width of 8 feet 4in (2500mm) makes the transportation economical without the need of oversized permits in most of the states.
Torque: 130 kNm, 94000 lf-ft
Max depth: 36,5 m, 120 ft
Weight: 36300 Kg, 80000 lb
Flywheel Power: 124 kW, 167 hp
HPM125 Short Mast
The HPM125 Short Mast has been designed for job sites where space and height are limited.
The minimum overall height of just 18 feet (5.5m) allows the operator to work in low head-room areas, under bridges, power lines, inside buildings, etc.
Torque: 130 kNm, 94000 lf-ft
Max depth: 14 m, 46 ft
Weight: 32400 Kg, 71430 lb
Flywheel Power: 124 kW, 167 hp